This frequently happens due to burnt out heating element. Also, it can be broken control board relay or burnt thermostat. Pretty frequently such problems happen because one of the hot wires has no voltage. or broken circuit breaker. If it is a gas oven then the problem can be in gas valve and ignitor or flame sensor malfunctions. All those will not let you bake your favorite cookies and we are ready to repair your oven quickly and with warranty!

Usually the thermostat is not adjusted or thermal probe is broken. There also might be electronic control board malfunctions or mechanical deformations of heating element. Sometimes you should check door seal – it can be damaged. If you notice your appliance malfunctions invite us to make a diagnosis and we will find the source of the problem.

There are as little as 3 reasons: broken fan, burnt thermostat and control board malfunction. In rare cases it might be mechanical deformation of fan blade by some dish or jamming by food pieces.

Probably, the door switch or door lock motor are broken and do not let safely start self-clean mode. Sometimes the problem is in control board or thermostat. Sometime the thermal fuse gets burnt because this mode supposes oven temperature as high as extreme 650F. We have solved this problem dozens of times and know how to repair it.

If it is a gas stove then it might be a broken ignitor module, spark electrode or gas valve. Also, it can be a broken switch behind a gas control knob. In electrical stove the worn burner element or broken power board can cause problems. For an induction stove the problem may be in power board malfunction and can be solved by replacing.

In this case, it is worth checking the switch or the burner damages. In a gas stove the problem might happen due to mains gas low pressure or broken gas valve as well as because of wrong type of gas.

It often happens due to broken ignitor module. But sometimes owners pour out something on the cooktop, the liquid gets inside the stove and shorts wires of ignitor module. It is very difficult to repair it by yourself, so you are welcome to call us!

The oven baking element also does not heat. The problem can be in broken plug cord or one of the hot wires has no voltage. The circuit breaker shall also be checked first since the problem might be in it.

This problem basically happens in induction stoves. There might be power board malfunctions, so it shall be replaced.